["– 2007 Mercury Montego 2007","– 2009 Ford Five Hundred 2007","– 2009 Ford Freestyle 2007","– 2009 Ford Taurus X 2008","– 2009 Lincoln MKX 2007","– 2009 Lincoln Navigator 2007","– 2009 Lincoln Zephyr 2006","– 2010 Ford Focus 2010","– 2010 Mercury Sable 2008","– 2011 Mazda Tribute 2007","– 2011 Mercury Mariner 2005","– 2011 Mercury Milan 2006","– 2012 Ford Edge 2007","– 2012 Ford Escape 2007","– 2012 Ford Expedition 2009","– 2012 Ford Explorer 2007","– 2012 Ford Flex 2009","– 2012 Ford Fusion 2007","– 2012 Ford Mustang 2010","– 2012 Ford Taurus 2008","– 2012 Lincoln MKS 2006","– 2012 Lincoln MKZ 2006"]
Replacement for PN: 164-R7040 5914457 6E5T-15K601-AD
KEYS ARE UNCUT. CONTACT ZIPPYLOCKS@GMAIL.COM TO DISCUSS CUTTING SERVICES PRIOR TO PURCHASE
Fits:
2007 – 2012 Ford Edge
2007 – 2012 Ford Escape
2009 – 2012 Ford Expedition
2007 – 2012 Ford Explorer
2007 – 2009 Ford Five Hundred
2009 – 2012 Ford Flex
2010 – 2010 Ford Focus
2007 – 2009 Ford Freestyle
2007 – 2012 Ford Fusion
2010 – 2012 Ford Mustang
2008 – 2012 Ford Taurus
2008 – 2009 Ford Taurus X
2006 – 2012 Lincoln MKS
2007 – 2009 Lincoln MKX
2006 – 2012 Lincoln MKZ
2007 – 2009 Lincoln Navigator
2006 – 2009 Lincoln Zephyr
2007 – 2011 Mazda Tribute
2005 – 2011 Mercury Mariner
2006 – 2011 Mercury Milan
2007 – 2007 Mercury Montego
2008 – 2010 Mercury Sable
Self-program: Yes, If You Currently Have Two Factory Keys That Start And Run Your Ford In Your Possession.
Programming Instructions: You Must have Two Master Working Keys (keys that came with the vehicle from factory.) to perform this procedure. If you only have one working key or none at all it must be programmed by a dealer or locksmith! If you do have two working key and one of the keys are copies or clone key. The procedure below won’t work. Your New third (unprogrammed) key must also be cut prior to performing this procedure. 1. Insert an existing (working) key into the ignition cylinder. 2. Turn the ignition cylinder ON (Position 3) and back to OFF (Position 1). Ignition should stay in ON position for at least three seconds but no more than ten seconds. 3. Remove the existing key and WITHIN TEN SECONDS, insert a second working key and turn to ON and then back to OFF. Ignition should stay in ON position for at least three seconds but no more than ten seconds. 4. Remove the second key, insert the New (unprogrammed) key before twenty seconds have elapsed and turn to ON. Leave it in the ON position for at least six seconds and turn back to OFF. 5. If the new key has been successfully programmed it will start the vehicle and operate the remote keyless entry system. The theft indicator light will light up for three seconds to indicate the key was successfully programmed. If the new key was not successfully programmed, repeat steps 1-4. If the remote portion of the remote did not program but the key will start the vehicle, then please perform the procedure below to program the remote portion of your remote head key.
