Part # 04686481AF, 04686481AA, 04686481AB, 04686481AC, 04686481AD, 04686481AE
Fits:
*Please Note: match both FCC ID and Part number with the original remote
2001-2003 Chrysler Prowler
1999-2003 Chrysler Town & Country (w/o Power sliding doors)
2001-2004 Chrysler Voyager (w/o Power sliding doors)
1999-2003 Dodge Caravan (w/o Power sliding doors)
2001-2004 Dodge Dakota
2001-2003 Dodge Durango
2002-2005 Dodge Ram Pickup
On-board Programming: Yes - 1 working remote required.
Programming Instructions: 1. Enter your vehicle and close all doors. 2. Fasten your seat belt ( fastening the seat belt will cancel any chiming that may confuse you during this programming procedure.) 3. Place key into the ignition. 4. Turn the ignition to the ON position ( DO NOT START THE ENGINE ) 5. Press and hold the UNLOCK button on a working remote. 6. Continue to hold the UNLOCK button, wait at least 4 seconds, but no longer than 10 seconds, then press and hold PANIC button. 7. When a single chime is heard, release both buttons. The chime indicates the system is in program mode. 8. Press and release both the LOCK and UNLOCK buttons, simultaneously on the remote to be programmed. 9. A single chime will be heard. The chime indicates the the remote was recognized. 10. Within 4 seconds of hearing the chime, press and release any button on the remote being programmed. 11. A single chime will be heard The chime indicates the remote has been programmed. 12. Repeat steps 8 to 11 for a total of 4 remotes. 13. Turn the ignition to the OFF position or wait 60 seconds to exit program mode.
